Tech Source GFX 400 Series - Manual (Page 19)

Chapter 3 – Software Installation
3-7
mkoconfig
uses the same conventions as Sun’s m64config
or ffbconfig utilities. All of the parameters, which are set
using the interactive version, can be set by specifying the option
followed by a desired value. The parameters are:
-dev selects the devi ce to
configure
-res sets the resolution
-res \? shows resolutions
-file machine | system specifies whether to
modify OWconfig from
/etc/openwin/
server/etc or
/usr/openwin/
server/etc
respectively
-depth 8|24 changes the bit depth to
8 only or 8+24 mode
-defaults resets device to default
parameters
-doublewidth TRUE|FALSE Enable/Disable the dual
screen output feature.
Please refer to Section
3.5.
-24only TRUE|FALSE forces all windows to
use 24-bit visuals. This
will disable 8+24 mode
and may prohibit some
8-bit applications from
working