Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 29)

Chapter 4 – Invoking X Windows
4-9
MOX16 MOX, 8-bit Normal, 13-bit Group, 5-bit Absolute
MOX24 MOX, 8-bit Normal, 21-bit Group,13-bit Absolute
The following additional MOX mode applies to the Raptor 1100T,
Raptor 2100T and Raptor 2500T-DL cards:
MOX32 MOX, 8-bit Normal, 32-bit group, 24-bit absolute
4.5 Configuring with an Elsa Gloria Card
All Raptor cards can be used with the Elsa Gloria card in multi-
screen mode. For the cards to work together properly, an
updated ddx module for the Elsa Gloria (lib_dec_comet.so)
must be installed. This module can be obtained either from HP
or from Tech Source. In addition, the -I -css options must be
added to the end of the command line.
prompt# X -I -css
A Raptor GFX-8PD card can be used with the Elsa Gloria card if
the VGA BIOS is disabled on the Raptor GFX-8PD card.
Contact Tech Source (see Chapter 7) for more information. As
with the other Raptor cards, the -I -css options are necessary
to fix the Elsa Gloria bugs.
NOTE: -I -css must be the last options on the command
line. The X Server will ignore all subsequent options.