Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 18)

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
3-4
3. Mount the CD-ROM on /cdrom. For example, if the CD-
ROM device is located at the /dev/disk/cdrom0c, type:
prompt# mount -t cdfs -o rrip \
/dev/disk/cdrom0c /cdrom
4.
a. To install the software for Raptor 2000 and Raptor 1000
type:
prompt# cd /cdrom/RAPTOR
prompt# setld -l .
b. To install the Raptor GFX-8PD software package, type:
prompt# cd /cdrom/GFX
prompt# setld –l .
c. To install the software for Raptor 2100T, Raptor 1100T
and Raptor 2500T-DL, type:
prompt# cd /cdrom/RAPFT
prompt# setld -l .
d. To install the RAPMOX503 package, type:
prompt# cd /cdrom/RAPMOX
prompt# setld -l .
NOTE: You must install RAPMOX package if you plan to use
MOX ( Multiple Overlay Extension) features
5. You will need to reboot the system for the installation to take
effect.