Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 13)

Chapter 2 – Hardware Installation
2-3
2.3 Raptor 2100/2500 FPS Installation
Figure 2-1 – Raptor 2100 Digital Flat Panel Subsystem
Tech Source offers two flat panel subsystems: the Raptor
2100FPS with a resolution of 2048x2048 (4MP), and the Raptor
2500FPS with a resolution of 2560x2048 (5MP). Each
subsystem is comprised of one LCD flat panel (4MP or
5MP), one Raptor 2500T-DL graphics card, and a standard Dual-
Link DVI cable to connect them together.
On the back of the Raptor LCD panel are two DVI inputs, labeled
A and B. Plug the Dual-Link cable into either
port. Optionally, connect a second Raptor 2500T-DL card to
the remaining port. Select which signal to display by accessing
the OSD (on-screen display) or by sending the appropriate
signals to the panel's RS232 interface. For more information on
the RS232 interface, please refer to the Raptor LCD manual.