Tecfluid LD60 - Manual (Page 5)

When the LD-60 is connected to detect a maximum level, the load is “activated” when the fork is
not in contact with the product. In the same way, when the LD-60 is connected to detect a
minimum level, the load is “activated” when the fork is in contact with the product.
The LD-60 has a bi-colour LED that indicates the state of the load “activated” (green colour) or
“open” (red colour).
5
With the AC version. the connection without a load will damage the instrument ! !
Carga
(relé, electroválvula, etc...)
Carga
(re lé, electrov álvul a, etc...)
The LD-60 detector cannot be connected in series. Each detector must have its own load.
Load
(relay, electrovalve, etc...)
Load
(relay, electrovalve, etc...)