beautypg.com

Menu operation basics, Menu operations – Teac RC-601MKII User Manual

Page 14

background image

14

TASCAM RC-601MKII

MENU OPERATIONS

Menu Operation Basics

To enter or exit the menu mode, use the MENU key. In the
menu mode, use the SEARCH dial, JOG/DATA dial and

Ú

key for operations in the menu mode.

1 Press

the

MENU key.

The menu screen is displayed in the display window.

The following are displayed in each menu screen.

2 Use

the

JOG/DATA dial to select the desired menu item.

Turning the dial clockwise increments the menu No.,
while turning it counterclockwise decrements the menu
No.

z

At this stage, the menu No. blinks to indicate that the

menu item is currently selected.

z

The menu item display is scrolled immediately after

the screen is switched, and then the leading 12
characters are displayed fixed in the display window.
For some menu items, the details of individual setting
values are displayed in addition to the item details.

3 Either press the

Úkey, or turn the SEARCH dial

clockwise (towards YES) to apply the selected menu
item.

The menu No. stops blinking and stays lit.

z

The following steps (4 to 6) are not applied to menu

No. 05 (“PROG”), menu No. 21 (“A_CLR”) and the
total motor time display.

4 Use the JOG/DATA dial to select the desired setting

value.

The current setting value blinks when it is changed.

5 Either press the

Úkey, or turn the SEARCH dial

clockwise (towards YES) to apply the selected setting
item. When the new settings are fixed, the menu mode
automatically ends.

[NOTE]

• The alphabet characters of the menu item names are

displayed as follows:

• All operations including menu operations on the

CD-601MKII are not accepted while menu operations are
being performed on the RC-601MKII.

• Likewise, when menu operations are being performed

on the CD-601MKII, all RC-601MKII operations including
menu operations are not accepted.

Menu No.

Menu item name Current setting value

Details Display

RC-601MKII_Eng.indd 14

3/24/2005 2:38:17 PM