Teac RC-601MKII - Manual (Page 10)

10
TASCAM RC-601MKII
BASIC OPERATIONS
Details of Transport Key Operations
READY key (
π)
Pressing this key sets the CD-601MKII to the online READY
mode.
To perform online playback, the remote control unit must
first be set to the online READY mode.
Audio signals are not output from any of the terminals
unless the CD-601MKII is in the online READY mode.
Online READY point
The online READY point is as follows according to the state
of the CD-601MKII when the READY key is pressed.
• When the tray is open: Start of track 1 on the disc
• In the monitor PAUSE mode: Point when the READY key
was pressed
• When disc operation is stopped/in the monitor playback
mode: Start of track 1 on the disc (when a cue point is
not registered), or the position where monitor playback
was last started from the monitor PAUSE mode (cue
point)
• During online playback (only when the failsafe setting is
OFF): Point when the READY key was pressed
z Note, however, that in the memo mode (MEMO indicator
is lit), the remote control unit enters the online READY
mode at point A when point A is already set. (→ page 19
“Functions Using Memo (A, B) Points”)
[NOTE]
• When the READY key is pressed with the disc tray of the
CD-601MKII opened, the remote control unit enters the
online READY mode at the start of track 1 after the disc
tray is closed.
• When the failsafe setting is ON, operation of search-
related keys such as TRACK and the numeric keys,
and the MENU key is not accepted in the online READY
mode. (→ page 25 “Failsafe Function”)
ON LINE key (
¥)
When this key is pressed in the online READY mode
(READY key is lit), online playback is started. During online
playback, this key lights (red).
In a mode other than the online READY mode, online
playback is not started even if this key is pressed.
To cancel online playback, press the STOP key.
In the default setting, the online playback signal is output
from all analog/digital output terminals on the CD-601MKII.
Note, however, that the online playback signal can be set
in menus not to be output from the UNBALANCED analog
output terminal and SPDIF digital output terminal. (→ page
24 “Setting the Terminals for Monitor Output”)
[NOTE]
• When the failsafe function is ON, operation of keys other
than STOP, PLAY MODE and DISPLAY MODE is not
accepted during online playback. (→ page 25 “Failsafe
Function”)
MONITOR key (
¥)
When this key is pressed while disc operations are stopped,
in the online READY mode or monitor PAUSE mode,
monitor playback begins. (The key is lit.)
In the default setting, the monitor playback signal is output
from all analog/digital output terminals on the CD-601MKII.
Note, however, that the online playback signal can be set in
menus not to be output from the BALANCED analog output
terminal and AES/EBU digital output terminal. (→ page 24
“Setting the Terminals for Monitor Output”)
[NOTE]
• W h e n t h i s i s p r e s s e d w i t h t h e d i s c t r a y o f t h e
CD-601MKII opened, the remote control unit enters the
monitor playback mode at the start of track 1 after the
disc tray is closed.
• When this key is pressed while disc operations are
stopped, monitor playback begins from the start of track 1.
• This key blinks during a rehearsal for checking the audio
of a memo point. (→ page 20 “Confirming the Audio of
Memo Points (rehearsal)”)
PAUSE key
When this key is pressed while disc operation is stopped, in
the online READY mode or during monitor playback, the CD
player enters the monitor PAUSE mode. In the monitor PAUSE
mode, “PAUSE” is displayed in the character display area of the
display window.
[NOTE]
• When failsafe is set to OFF, the remote control unit
enters the monitor PAUSE mode also when this key is
pressed during online playback. (→ page 25 “Failsafe
Function”)
STOP key (
ª)
When this key is pressed during online playback, in the
online READY mode, during monitor playback, or in the
monitor PAUSE mode, the disc will stop. This indicator is lit
while disc operations are stopped.
Note, however, that when the incremental play function
is set to ON, and the STOP key is pressed during online
playback and monitor playback, the remote control unit
stands by at the start of the next tune to be played at either
the online READY or monitor PAUSE mode according to the
auto cue up setting.
RC-601MKII_Eng.indd 10 3/24/2005 2:38:15 PM