4video outputs – SVSi N-Series Pre-implementation User Manual
Page 12
Distribution Switching Recording Windowing Wall Processing Control
Southern Vision Systems, Inc.
256. 461.7143
www.svsiav.com
SVSi is a trademark of Southern Vision Systems, Inc. in the United States and other countries.
All other brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered
trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. SVSi
disclaims any interest in the marks and names of others.
800DOCPREIGREV2.0
Made in the USA.
4
VIDEO OUTPUTS
Decoders attached to the video network request the video stream and convert the IP packets to synchronized video and
audio for display. All decoder video output is digital (even if input is analog) and is output through the DVI-D connector.
Balanced and unbalanced analog audio is available through the 5-pin Phoenix connector on the decoder or embedded
digital audio is available through the DVI-D connector. Most decoder and encoder models have an IR transmitter and bi-
directional serial port built-in for control of the display or third-party device co-located at the decoder. Please check your
specific N-series model to make sure IR and serial control options are available if required.
Each decoder (and encoder) have locally-stored splash-screens (LocalPlay) that can be commanded to play or will show in
the event of network (or video signal) outage. When the network link goes down, this image will automatically play and can
be used for diagnostics. Users can upload their own LocalPlay images and audio for digital signage when live video may
not be needed. Up to 64 images can be stored in each N2000 device and a single splash-screen only for N1000 and
N3000.
SVSi's Networked AV IP format allows it to be integrated over copper, fiber, or wireless links with the appropriate network
hardware. With IT support, high-definition video and audio can be streamed over common networks to be delivered when
and where it is needed.
For pre-installation support, please contact SVSi via email at
or (256) 461-7143.
For questions specific to an existing network, please contact your IT manager and refer to this document.