SVSi N2510 User Manual
N2510 quick start
Table of contents
Document Outline
- N2510 Windowing Processor Rear View
- Wiring for the N2510
- 1. The N2510 requires one to five network connections. Connect network cable(s) from the switch to Port(s) U0, U1, U2, and U3 (this is optional) and one connection from P0 or P1 or P2 to the network switch (this connection is required).
- Troubleshooting
- Additional Required Hardware
- Wall Processing
- Video Wall Setup
- Configuration Choices
- Installing and Discovering Your New Networked AV Product
- Crop/Pan/Zoom Page
- Unit Settings Page
- Arrangement Page
- Device Name
- Wiring for the N2510
- N2510QSGRev2.2even.pdf
- N2510 Windowing Processor Rear View
- Wiring for the N2510
- 1. The N2510 requires one to five network connections. Connect network cable(s) from the switch to Port(s) U0, U1, U2, and U3 (this is optional) and one connection from P0 or P1 or P2 to the network switch (this connection is required).
- Troubleshooting
- Additional Required Hardware
- Wall Processing
- Video Wall Setup
- Configuration Choices
- Installing and Discovering Your New Networked AV Product
- Crop/Pan/Zoom Page
- Unit Settings Page
- Arrangement Page
- Device Name
- Wiring for the N2510
- N2510 Windowing Processor Rear View