Dynalink RTA230 User Manual
Page 52
ADSL Router User Manual
44
as illustrated below:
(ftp://203.70.212.52)
IP Address seen by Internet Users
Please note that, in the above picture, both Internet users are connecting to the same IP address, but
using different protocols.
To Internet users, all virtual servers on your LAN have the same IP Address. This IP Address is
allocated by your ISP. This address should be static, rather than dynamic, to make it easier for Internet
users to connect to your Servers. However, you can use Dynamic DNS feature to allow users to
connect to your virtual servers by using a URL, instead of an IP address.
To set a virtual server, please open the
Virtual Servers item from the Advanced
Setup - NAT menu.
Add New Virtual Servers
To add a new Virtual Server, please click Add. In the “Select from the following list” drop-down list,
you can select required entry
Select from the following list:
Choose one of the services from the list,
such as SMTP, WEB, FTP, DNS and so on.
The corresponding data will be shown on the
data boxes below.
Customized service:
Type a new service name for building a
customized service for specific reason.
Protocol:
Select a protocol for the service that you
choose.
External port for this service:
The port number will be shown