Dynalink RTA230 - Manual (Page 11)

Chapter 2: Installation
3
Chapter 2
Installation
Choosing a place for the ADSL Router
Place the ADSL Router close to ADSL wall outlet and power outlet for the cable to reach it
easily.
Avoid placing the device in places where people may walk on the cables. Also keep it away
from direct sunlight or heat sources.
Place the device on a flat and stable stand.
Connecting the ADSL Router
Follow the steps below to connect the related devices.
Please attach one end of the Ethernet
cable with RJ-45 connector to the LAN
port of your ADSL Router.
Connect the other end of the cable to the
Ethernet port of the client PC.
If you want to connect to a hub for used
by many devices, please connect the other
end to the uplink port of the hub.