Configure pc to get ip address from dhcp – Dynalink RTA230 User Manual
Page 26
ADSL Router User Manual
18
Configure PC to get IP address from DHCP
If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should configure
the client PCs to obtain a dynamic IP address. Please follow the previous section to install TCP/IP
component. Only that you do not need to specify an IP address when configuring TCP/IP properties.
The following section describe the procedures for CPEs to get IP address:
For Windows 98
On the IP Address tab, select Obtain an IP
address automatically. Then click OK.
For Windows ME
On the IP Address tab, select Obtain an IP
address automatically. Then click OK.