Super Systems 9120 - Manual (Page 29)

4574 - SSi 9120 Manual Rev A Page 29 Super Systems Inc
Slave 2 PV
Slave 1 SP
Slave 2 SP
Input 3 Value
Remote Setpoint Hysteresis
This option will allow the user to enter the remote setpoint hysteresis. The range is 0 to 9999.
Minimum temp/pump run
This option will set the minimum temperature for the pump to run, if that feature is used. A 0 value will disable the
minimum temperature feature.
Note: The furnace that is being sampled must have its temperature connected to input 3
for the pump minimum temperature feature to work .
Input 1
This value will display the Input 1 type. This value cannot be changed from this screen.
Input 2
This value will display the Input 2 type. This value cannot be changed from this screen.
Input 3
This value will display the Input 3 type. This value cannot be changed from this screen.
Loop 1 PV
This value will display the Loop 1 PV type. This value cannot be changed from this screen.
Loop 2 PV
This value will display the Loop 2 PV type. This value cannot be changed from this screen.
Communications Setup
Communications Setup is the communications definitions for the controller. Please contact Super Systems Inc. at 800-
666-4330 for more information regarding port setup. It is strongly recommended that none of the settings be modified