Sundance SMT401 - Manual (Page 8)

Released Page 8 of 21 SMT401 PMC TIM Carrier User Guide
Document Name: SMT401 User Guide V1.2.doc Issue : 02 Rev.: 1.11
The SMT401 is used as a slave in a JTAG chain.
The SMT6012 user manual describes a typical master/slave configuration in
the chapter 6.
(
http://www.sundance.com/docs/6012%20User%20Manual.pdf )
A JTAG Master such as a Sundance’s carrier board SMT310Q or SMT310
controls the SMT401 JTAG chain.
Any DSP module fitted on the SMT401 will appear in the DSP list of the
master chain.
For instance, a SMT376 is mounted into the SMT401, and the SMT310Q is
master of the SMT401.
The SMT310Q is connected to the SMT401 JTAGIN connector using a
Sundance Buffered JTAG cable (SMT501):
Figure 4-1: SMT401 JTAGIN as Slave JTAG connected to a SMT310Q as master JTAG
Product Name: SMT401 Revision Date: 07 December 2004
Author: Mark I. Cartlidge (Updated by SM, added JTAG slave section) Original Date: 12 May 1999