Sumix SMX-12A2x - Manual (Page 60)

Use of Accessories
60 SMX-M8xx Series USB2.0 Camera User Guide
CS-mount
In this case, the camera is used without both C-mount adapter and C-mount adapter
with IR-cut filter.
Converting the Camera from CS-mount to C-mount or from C-mount to CS-mount
● To use the SMX-12A2x camera as C-mount, screw the C-mount adapter/C-mount
adapter with IR-cut filter in.
● To use the SMX-12A2x camera as CS-mount, screw the C-mount adapter/C-mount
adapter with IR-cut filter out.
Note: It is recommended to screw in (as well as screwing out) the C-mount adapter/C-mount adapter with IR-cut filter,
lens or the camera's cover when the camera is facing down or when the camera is in horizontal position - to pre-
vent the sensor contamination.
Using Tripod Adapter
To put the tripod adapter on the camera:
1 Loosen the screw of the adapter.
2 Put the Tripod adapter on the camera. Locate the tripod on the camera.
To remove the tripod adapter from the camera:
1 Loosen the screw of the adapter.
2 Remove it from the camera.