Studio Technologies 76 V.1.04 - Manual (Page 19)

Model 76/77 User Guide Issue 4, September 2008
Studio Technologies, Inc. Page 19
for Surround
Confi guration—Model 77 Device Address and Stereo Output
Default: Device address A1.
Stereo output can be enabled.
Note: The Model 77’s device address is the only parameter stored in the Model 77. All other parameters are stored
in the Model 76.
Press and hold the Mute/Solo
button to display and select the
Model 77’s device address.
Use the Level control to change this
specifi c Model 77’s device address.
Address can be either A1, A2, A3, or A4.
When the
Mode button is
pressed, these
LEDs display
the status of the
stereo output
function. When
LED Surround
is lit the stereo
output func-
tion cannot be
enabled. When
LED Stereo is lit
the stereo output
function can be
enabled. Use the
button to change
the confi guration.