Dish Network Platinum Plus 121150 - Manual (Page 14)

12 121150
TV/V IDEO B UTTON
If you connect the receiver with its back panel TV ANTENNA/CABLE
IN and TV SET OUT ports, use this button to switch the receiver
between the satellite signal (connect it to the SATELLITE IN port) and
another video signal like a cable or broadcast TV antenna input
(connect it to the receiver’s
TV ANTENNA/CABLE IN input).
Note : If you connect the receiver to other devices with the phono
(RCA) jacks or the S-VIDEO output, you must use the TV
menus to change the input from local broadcast TV to satellite
TV.
P OWER B UTTONS
Press the blank POWER button to turn the receiver on or off. The
POWER light on the receiver’s front panel turns on to show the
receiver is on, and turns off to show it’s off.
M ENU B UTTON
Press this button to open the Main Menu .
P AGE U P AND P AGE D OWN B UTTONS
Press the PAGE UP button or the PAGE DOWN button to scan, page
by page, through the Program Guide , a Themes list, a Favorite
List , an Event Timers list, or a list of channels.
Note : An “event” is any satellite program.
text_dishpvr.fm Page 12 Tuesday, January 28, 2003 8:04 AM