Dish Network Platinum Plus 121150 User Manual
Page 12
10
121150
7. To check the remote control address, press and hold
the
SAT
mode button for three seconds. Then, let go
of the
SAT
button, and press the
POUND
(
#
) button
twice. The
SAT
mode button flashes the same number
of times as the address you entered in step 3.
8. Press the
SELECT
button to close the
Important System Information
screen.
S
WITCH
B
ETWEEN
TV
AND
D
EVICE
V
OLUME
C
ONTROL
When you set up the remote to control a TV, the
MUTE
and
VOLUME
buttons control the TV volume. However, if you want to use the
AUX
mode to control a tuner or amplifier and the device has a volume
setting, you can set up the remote to control the device’s volume
instead of the TV volume.
To set the remote to control the device’s volume:
1. Press and hold the
AUX
mode button
for three seconds, and then let go of it. The
AUX
mode
button will blink.
2. Press the
POUND
(
#
) button.
3. Press the plus (+) side of the
VOLUME
button.
4. Press the
0
number button.
5. Press the
POUND
(
#
) button.
The
AUX
mode button flashes three times.
6. Press the
SAT
mode button.
7. Press the plus (+) and minus (-) sides of the
VOLUME
button.
The device’s volume changes and the
AUX
mode
button lights instead of the
TV
mode button.
text_dishpvr.fm Page 10 Tuesday, January 28, 2003 8:04 AM