SoundFreaq SFQ-07 - Manual (Page 17)

17
Charging an External Device
The POWER OUT jack can be used to charge most devices that allow for USB charging
(including many mobile phones, smart phones and wireless headsets).
Connect one end of USB power cord to POWER OUT jack of the system, and the other end to
your USB device. Then turn on the system to charge the connected USB device.
Notes:
y Please use the USB power cord that came with your device to connect to Sound Spot to
charge.
y We suggest when using the POWER OUT jack to charge external mobile devices, the
system’s battery should be fully charged.
y If the battery power of the system is less than 15%, the charging function will be unavailable.
y When the system is operating by internal battery only and charging external device at the
same time, when the battery level is low, user is suggested to keep playback volume to
low/medium level to avoid sudden turn off of the system when the internal battery is drained
off by the external device
y During Dual System Playback operations, we recommend you do not charge each other
between the two systems (Using primary system to charge secondary system, or using
secondary system to charge primary system.)
POWER OUT
To external USB
devices, such as
mobile, smartphone,
etc.
AUX IN AUX OUT
POWER IN POWER OUT
Primary System Secondary System