SoundFreaq SFQ-07 - Manual (Page 13)

13
Playing back from Macbook or
Macbook Pro
1. In the desktop screen, select the Open
Bluetooth Preference.
2. If there are any old Sound Spot records,
remove them. Click the Continue button
to continue pairing process.
3. Once completed, the pairing success
screen will come out.
Note:
y Don’t quit the page immediately. You
may notice that the previous dialog
screen still shows the device not
connected. Just ignore it. It’s confusing
to the user. In fact, it’s connected
already.
4. Open iTune, play a song. Then use the
mouse to click the Bluetooth icon at the
top right hand corner of the desktop
screen, select the Sound Spot option
and then select the Use as Audio
Device (Stereo). After a while (a few
seconds), the music will come out from
the SFQ-07 system. If not, select the Use
as Audio Device (Stereo) once again.
The Sound Quality should be good.
Playing back from PC/Notebook
1. Press the Start button to open the
Device and Printers dialog box.
2. Turn on the SFQ-07 system, then tap
and hold PAIR button for 1 second to put
into the pairing mode.
3. Select the Add a device in the Device
and Printer dialog box. The Sound Spot
icon will appear on the display.
4. Double click the Sound Spot icon and
wait until the device has been added
successfully.
5. Click the Close button to close the
Device and Printer dialog box. A Sound
Spot icon appears in the dialog box.
6. Double click the Sound Spot icon and
the device connection screen will be
shown.
7. Click the Connect button in the Music
and Audio option.
8. Once connected, the LED indicator on
the system will be solid on in white and
the connection success screen will be
shown.