SoundFreaq SFQ-07 - Manual (Page 16)

16
Dual System Playback
Two Sound Spot systems can be connected together using the supplied audio cable, and they
will play as one speaker system with left and right audio split between each for true stereo
separation. You should purchase another Sound Spot system separately.
Before establishing the dual system playback, be sure to turn off the power of each system.
Connect the AUX OUT jack of one system to AUX IN jack of another system using the supplied
audio cable.
The Sound Spot that you connect AUX OUT jack will be designated as the primary system; and
at the same time, another Sound Spot that you connect AUX IN jack will be designated as the
secondary system.
y When the primary system is in Bluetooth mode, the left channel and right channel are mixed,
so the secondary system will play only in a mono channel.
y When the primary system is in AUX IN mode with AUX IN jack inserted with external source,
after connecting to the secondary system, the primary system will be designated as L
channel and the secondary system will be designated as R channel. Now you can enjoy
stereo sound effect using these two systems.
Note:
y During dual system playback operations, you need to adjust the Volume level by tapping
VOL+/ VOL– buttons on each system separately.
AUX OUT AUX IN