SoundFreaq SFQ-10 User Manual
Welcome to soundfreaq, Happy listening to you, Pocket kick

Welcome to Soundfreaq.
We are a co-op of craftsmen— designers and engineers— with a
passion for great sound. We develop our products from the ground up
to offer premium sound quality and wireless versatility.
Thank you for choosing Pocket Kick. We sincerely hope that you enjoy
your new speaker. Please share your experience with us:
[email protected]
Happy Listening to you.
We invite you to join our Soundfreaq community:
FACEBOOK
facebook.com/soundfreaq
twitter.com/soundfreaq
soundfreaq.com
Pocket Kick
Playback via Bluetooth
Playback via AUX IN
Charging the Built-in Battery
Using Hands-free Calling
1. Slide up the Power switch to turn on Pocket Kick.
2. Press the (Pair) button on Pocket Kick to enter pairing
mode – the Pair indicator light will flash rapidly.
3. Open the Bluetooth settings on your Bluetooth-enabled
device. Once Pocket Kick is recognized “Pocket Kick”
will appear in the list of Bluetooth devices. Select
“Pocket Kick” to pair with your device. The Pair
indicator light will turn solid once Pocket Kick is
successfully connected.
4. You can use the Play controls on Pocket Kick to control
playback.
Notes:
• On most devices, no password is needed to pair, however,
if a password is requested the default password is
“1234”.
• You can change the volume by either using the volume
buttons on Pocket Kick or changing the volume on your
paired device. For max volume, turn both volumes to
maximum.
Pocket Kick has a built in rechargeable battery. To charge, plug
into a powered USB port such as a computer, phone or tablet
charger. It is suggested to use the micro USB cable included in
the package for charging your device. The battery indicator
combined with Power switch will indicate the charging status.
Connect any device with a headphone jack by
plugging the 3.5mm cable (included) into the
AUX IN jack. When the AUX IN jack is
inserted, the system will only play via AUX IN.
Note: In order to save the energy, please
unplug the line in cable from the Aux Line In
of Pocket Kick when do not use.
Note: For charging or charging while playing Pocket Kick,
please use minimum 1A USB power adaptor. Please fully
charge Pocket Kick before using.
1. Slide up the Power switch to turn on Pocket Kick.
2. Establish the Bluetooth connection between the system
and your mobile phone.
To answer a call
When a call arrives, the music playback is muted and a ring
tone is heard from the system. Press Call button and speak
using the microphone.
To end a call
To end a call, press Call button. If you were listening to
music when the call arrived, it will be resumed when the call
has finished.
Notes:
• If a call arrives, press and hold Call button for about 2
seconds to reject it.
• If no call arrives, press and hold Call button for about 2
seconds to redial the phone number that is dialed last time.
Power switch
Pair indicator
Battery indicator
USB power port
Play/Pause
/Call button
Microphone
(Pair)
button
Play controls
Mode
Standby
Blinking Green (Slowly)
Blinks Green
Solid Green
Blinking White (Slowly)
Blinks White
Solid White
Power on (not connected)
Bluetooth or Aux in mode
Charging
Fully Charged
For further assistance with setting up Pocket Kick, we
are available at:
soundfreaq.com/support
156mm x 100mm
AUX IN jack