SOMFY Sonesse Ultra 50 - Manual (Page 8)

EN
8 Copyright © 2014 Somfy SAS. All rights reserved. Images not contractually binding
3. use and maintenanCe
3.1. uP and doWn buttons
Pressing the
Λ
or
V
button fully raises or lowers the
motorised product.
3.2. stoP funCtion
The motorised product is moving.
Pressing the stop button stops the motorised product.
3.3. tiPs and reCommendations for use
3.3.1. questions about the sonesse ultra 50?
If the motorised product still does not work, contact a drive and home automation professional.
Observations Possible causes Solutions
The motorised product does
not operate.
The drive is in thermal protection. Wait until the motor cools down.
4. teChniCal data
Power supply 230V ~ 50 Hz 120V ~ 60 Hz 220V ~ 60 Hz
100V ~
50/60 Hz
Operating temperature 0°C to + 60°C
Index protection rating IP 31
Safety level Class I
1)
2)
Somfy hereby declares that the drive covered by these instructions when marked for input voltage 230V 50Hz when used as
intended according to these instructions, is in compliance with the essential requirements of the Machinery Directive 2006/42/EC
and the EMC Directive 2004/108/EC.
An EC declaration of conformity detailing standards and specifications used and stating all particulars for identification of the drive,
name and address of the person(s) authorised to compile the technical file and empowered to draw up the declaration including place and date of
issue can be found at the Internet address www.somfy.com/ce.
This drive is maintenance-free
For the safety of goods and people, Somfy motors are equipped with thermal protection
that will trigger the motor stops in the event of overheating.
Repeated achieving this protection can degrade engine performance.
If the motor goes to thermal protection, please check your installation and check that the
motor is rated for the intended use.
A normal installation is not expected to trig this protection.
To avoid the drift of the end limits, do not cut the power supply more than 1 week.
