SOMFY Sonesse Ultra 50 User Manual
Page 3
EN
3
Copyright © 2014 Somfy SAS. All rights reserved.
Images not contractually binding
Contents
ORIGINAL GUIDE
1. Prerequisite information
1.1 fields of aPPliCation
The Sonesse 50 drive is designed to drive all types of indoor awning
(Roller blinds and projection screens), excluding pantographs.
The Sonesse 50 drive is designed to drive multi-banding roller blinds.
The Sonesse 50 drive is designed to drive several roller blinds simultaneously, where these are
interconnected by a drive bracket.
The Sonesse 50 drive is not designed to be used with a compensating spring.
Any use outside the fields of application is prohibited, in particular:
The Sonesse 50 drive is not designed for outdoor awnings (e.g. outdoor vertical blinds, roller
shutters, etc.)
The Sonesse Ultra 50 drive has been developed to meet indoor awning drive requirements.
Its quiet operation ensures user comfort and well-being.
For more information, and to optimise the acoustic performance of your indoor awning, please
contact a Somfy adviser.
1.
Prerequisite information 8
1.1 Fields of application
8
1.2 liability
9
2.
installation 9
2.1. Installation
9
2.2. Wiring
10
2.3. Commissioning
11
2.4. Tips and recommendations for
installation 12
3.
use and maintenance 13
3.1. Up and Down buttons
13
3.2. STOP function
13
3.3. Tips and recommendations for use 13
4.
technical data 13
These instructions applies to all Sonesse Ultra 50 and Sonesse Ultra 50 RH drive irrespective
of torque and speed variations.