SOMFY Sonesse Ultra 50 RS485 - Manual (Page 3)

3
EN
Copyright © 2014 Somfy SAS. All rights reserved.
Content
1. Prerequisite information 2
1.1 Fields of application 2
1.2 liability 3
2. Installation 3
2.1. Installation 3
2.2. Wiring 4
2.3. Commissioning 6
2.4. Tips and recommendations for
installation 6
3. Use and maintenance 7
3.1. Control function 7
3.2. Tips and recommendations for use 7
4. technical data 7
ORIGINAL GUIDE
1. PrereqUIsIte InformatIon
1.1 fIelds of aPPlICatIon
The Sonesse 50 drive is designed to drive all types of indoor awning
(Roller blinds and projection screens), excluding pantographs.
The Sonesse 50 drive is designed to drive multi-banding roller blinds.
The Sonesse 50 drive is designed to drive several roller blinds simultaneously, where these are
interconnected by a drive bracket.
The Sonesse 50 drive is not designed to be used with a compensating spring.
Any use outside the fields of application is prohibited, in particular:
The Sonesse 50 drive is not designed for outdoor awnings (e.g. outdoor vertical blinds, roller
shutters, etc.)
The Sonesse Ultra 50 RS485 drive has been developed to meet indoor awning drive
requirements.
Its quiet operation ensures user comfort and well-being.
For more information, and to optimise the acoustic performance of your indoor awning, please
contact a Somfy adviser.
These instructions applies to all Sonesse Ultra 50 RS485 drive irrespective of torque and
speed variations.