Smithco Supreme 35-000 (sn 101978) Parts & Service Manual - Manual (Page 89)

87
Accessories
13-298 FAN RAKE ATTACHMENT PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 13-310 Rake 5
2 13-306 Frame 1
3 HB-38-16-100 Bolt 3 /
8
- 16 x 1 4
HN-38-16 Nut 3 /
8
- 16 4
HWL-38 Lockwasher 3 /
8
4
4 HCP-12-450 Clevis Pin 1 /
2
x 4 1 /
2
1
5 19-107 Drawbar 1
6 HP-18-100 Cotter Pin 1 /
8
x 1 1
7 HCP-12-150 Clevis Pin 1 /
2
x 1 1 /
2
1
HHP-18 Bridge Pin 1 /
8
1
8 13-307 Hitch 2
9 HNCL-14-20 Center Lock Nut 1 /
4
- 20 5
10 HB-14-20-200 Bolt 1 /
4
- 20 x 2 5
INSTALLATION INSTRUCTIONS
1. Remove the complete rake assembly from the trap rake. Replace the clevis pin and bridge pin in the hitch for future
use with the rake.
2. Assemble hitch (Ref 8) to frame (Ref 2) using hardware (Ref 3). Assemble drawbar (Ref 5) to the hitch using clevis pin
(Ref 4) and cotter pin (Ref 6), as shown. The different holes in the hitch are for adjusting the angle of the rakes.
3. Assemble the five rakes (Ref 1) to the frame using the bolt and center lock nuts (Ref 9 and 10). Slide the fan rake
assembly under the rear of the trap rake to the hitch. Attach the drawbar to the hitch using the clevis pin and the bridge
pin (Ref 7).
4. Hook the chains from the frame to the hooks on the rake lift.