Smithco Supreme 35-000 (sn 101978) Parts & Service Manual - Manual (Page 71)

69
Accessories
13-107 INFIELD SCARIFIER PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 13-117 Grader Blade 1
2 HCP-12-150 Clevis Pin 1 /
2
x 1 1 /
2
2
3 HHP-18 Bridge Pin 1 /
8
3
4 13-115 Hitch (Pistols) 2
5 HMB-34-10 Machine Bushing 3 /
4
x 10GA 12
6 HMB-12-14 Machine Bushing 1 /
2
x 14GA 4
7 HP-18-100 Cotter Pin 1 /
8
x 1 1
8 HB-38-16-100 Bolt 3 /
8
- 16 x 1 9
9 13-114 Digger Blade 9
10 13-113 Frame 1
11 HNCL-38-16 Center Lock Nut 3 /
8
- 16 9
12 HRP-14-100 Roll Pin 1 /
4
x 1 2
13 13-146 Attachment Lift
14 34-016 Floorboard Support 1
15 19-217 Transportation Hook 1
INSTALLATION INSTRUCTIONS
1. Slide transportation hook (Ref 15) over the right tube of the frame (Ref 10). Insert bridge pin (Ref 3) in
hook for use when required later.
2. Using nine bolts (Ref 8) and nuts (Ref 11) attach digger blades (Ref 9) to the frame.
3. Insert hitch (pistols) (Ref 4) into tubes of frame with up to five machine bushings (Ref 5) in front and one
bushing in the rear of tube. Secure pistols with roll pins (Ref 12). Check spacing before driving in roll pin
all the way. For more tire clearance, machine bushings may be moved from front to rear.
4. Attach grader blade (Ref 1) to the frame as shown using machine bushing (Ref 6) and cotter pin (Ref 7).
5. Lift grader blade/frame unit (Ref 1 and 10) and hook pockets over the arms of attachment lift (Ref 13).
6. Attach pistols to the tabs of the trap rake frame undercarriage in the rear holes using clevis pins (Ref 2),
machine bushings (Ref 3) and bridge pins (Ref 15).
7. Turn machine on and test for proper operation.