Smart Avi RGB2VGA - Manual (Page 32)

THE RGB TO DVI(/VGA) CONVERTER
32
Factory Reset
Use the Factory Reset submenu to reset the unit to factory defaults, save user
presets or restore user presets
Figure 14 Factory Reset sub-menu
Auto Configuration
Use the Auto Configuration submenu to define whether the Converter carries out
automatic detection of the number of pixels per line and the best phase after a mode
change (a change of screen resolution and/or refresh rate at the graphic source).
Using automatic detection (while displaying an appropriate test pattern) ensures an
optimized image but the procedure introduces a delay in the picture appearing on the attached
console screen. If you want the picture to appear as fast as possible, you may want to disable
this feature. Auto Configuration is disabled in the default factory settings.
To view the Auto Configuration menu, select the Tools icon from the main menu and then
select the Auto Configuration icon.
Figure 15 Auto-Configuration sub-menu
Disable Automatic detection of pixels per
line and phase after a mode change
Enable Automatic detection of pixels per
line and phase after a mode change
Back to Tools menu
Factory Reset: Restore originally equipped
Setup data
Restore User Data: Restore previously
saved User data
Save actual User Data in internal memory
Back to Tools menu