Smart Avi RGB2VGA - Manual (Page 25)

DEVICE CONTROL
25
4.2 Using the OSD
The OSD is an icon-based utility. The top line of symbols shows the main menu categories:
Input Select
Specify whether the input is RGB (RGBS) or digital (for future expansion)
Scale Mode
Select the screen resolution of the attached display and select one of four
scaling modes.
Brightness – Contrast
Adjust brightness or contrast or reset to default values.
Color
Adjust color calibration, temperature, flesh/skin tone, hue and saturation.
Image
Adjust pixel clock and phase. Define picture size and position.
Tools
Set OSD position and size, factory reset.
1. Use the left and right arrow keys ( and keys in Windows program) to highlight
the icon you want. The OSD displays additional icons relating to commands in the
selected menu category.
2. Press the Enter key ( key in Windows program). The OSD highlights the first
command icon.
3. Use the Left and Right arrow keys ( and keys in Windows program) to
highlight the command or submenu you want. In the case of the latter, your selection
will cause the OSD to display additional command icons (Color Temperature
commands, for example).
4. Press the Enter key ( key in Windows program) to accept a highlighted command. If
this requires the increase or decrease of a value (Contrast, for example), the OSD
displays a value bar:
5. Use the Left and Right arrow keys ( and keys in Windows program) to change
the value as required.
-
+