Dynex DX-E201 - Manual (Page 27)

Specifications 27
Specifications
Standards • IEEE 802.3 10Base-T Ethernet
• IEEE 802.3u 100Base-TX Fast Ethernet
• ANSI/IEEE 802.3 NWay Auto-Negotiation
• PCMCIA 2.x
• 32-bit CardBus
Network media • Ethernet: UTP Cat3, 4, 5, EIA/TIA-568 100-ohm
• Fast Ethernet: UTP Cat5, EIA/TIA-568 100-ohm
Protocol • CSMA/CD
Host interface • 32-bit CardBus
Diagnostic LEDs • 10 M Link/Activity
• 100 M Link/Activity
Network data
transfer rate • Ethernet: 10 MBps (half-duplex)
• Ethernet: 20 MBps (full-duplex)
• Fast Ethernet: 100 MBps (half-duplex)
• Fast Ethernet: 200 MBps (full-duplex)
Temperature • Operating: -10~50°C (14~122°F)
• Storage: -10~70°C (14~158°F)
Humidity • Operating: 10%~90% RH, non-condensing
• Storage: 5%~90% RH, non-condensing
Driver support • Microsoft Windows 98SE, Me, 2000, XP
• Packet driver for NCSA
• Packet driver for WinSock
• Linux
Check www.dynexproducts.com for newest releases of
drivers
Emission • FCC Class B
• CE mark Class B
• VCCI-B
Dynex5x7-multi.book Page 27 Thursday, September 8, 2005 11:07 AM