Dynex DX-E201 - Manual (Page 14)

14 Setting up the network card
4 Click Internet Protocol (TCP/IP) in the This connection uses the
following items list, then click Properties. The Internet Protocol (TCP/IP)
Properties dialog box opens.
5 Click Use the following IP address, then type values for:
• IP address–The IP addresses on your network must be within the same
range. For example, if one computer has an IP address of 192.168.0.2,
the other computers should have IP addresses that are sequential, like
192.168.0.3 and 192.168.0.4.
• Subnet mask–The subnet mask must be the same for all the
computers on the network. The subnet mask is usually 255.255.255.0.
• Default gateway–The default gateway is the LAN IP address of your
wireless router. For information, see your router’s user guide.
6 Click Use the following DNS server addresses, then type the LAN IP
address of your wireless router. For information, see your router’s user
guide.
7 Click OK.
Dynex5x7-multi.book Page 14 Thursday, September 8, 2005 11:07 AM