Dynex DX-E201 - Manual (Page 16)

16 Component configuration
5 Click Start, Settings, Control Panel, then click System. The System
Properties window opens.
6 Click the Network Identification tab, then click Properties. The
Identification Changes dialog window opens.
7 Type the name of your computer in the Computer name box. This name
should be unique.
8 Type the name of your workgroup in the Workgroup box. This should be
identical for all computers on the network.
9 When finished, remove all disks from your computer and restart your
computer.
Dynex5x7-multi.book Page 16 Thursday, September 8, 2005 11:07 AM