Sierra Video UDC-161 - Manual (Page 30)

UDC-161 Owner’s Manual
• (V 2.2)
Page 30 of 36
Technical Specifications
Table 4. Card - Technical Specifications
Category Parameter Specification
Serial Digital
Video Input
Data Rates Supported
SMPTE 292 HD-SDI:
1.485 Gbps or 1.485/1.001 Gbps
SMPTE 259M-C SD-SDI:
270 Mbps
Frame Rates Supported
HD:
720p 23.98/24/25/29.97/30/50/59.94
1080i 25/29.97
1080p 23.98/24/25/29.97/30
1080p/sF 23.98/24
SD:
486i 29.97 NTSC, 575i 25 PAL
Impedance 75
Ω terminating
Equalization
HD: 328ft (100 meters) Belden 1694A
SD: 1000ft (300 meters) Belden 1694A
Return Loss >18dB at 5MHz - 1.485GHz
Analog Video
Input
Number of Inputs 3
Input Type Differential, Common Mode Rejection (5V AC)
Video Inputs HD: Component YPbPr and RGB
SD: Composite, Component YPbPr (BetaCam™,
MII™, SMPTE/N10), RGB, and Y/C
Conversion Bit Depth 12-Bits
SD Color Separation 5-Line Adaptive Comb or Notch Filter
Frequency Response HD: Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±
SD: Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±
Differential Phase SD: < ±0.4° typical
Differential Gain SD: < ±0.4% typical
Noise < -64dB (Luma Flat Field)
< -61dB (Luma Ramp)
Analog Front End Crosstalk Within Noise Floor Measurement
Return Loss > 20dB to 30MHz