Select preset, Select from one of the sixteen saved presets, Save settings – Sierra Video UDC-161 User Manual
Page 22: Load settings, Restore factory settings, Information submenu, Positive watts consumed, Negative watts consumed, Software release number, Software build number
UDC-161 Owner’s Manual
• (V 2.2)
Page 22 of 36
Select Preset
Select from one of the sixteen saved presets.
Save Settings
In this parameter, move the toggle switch up to save the settings to the card persistent storage.
Load Settings
In this parameter, move the toggle switch up to load the saved settings and make them active.
Restore Factory Settings
In this parameter, move the toggle switch up to make the factory default settings active, and make the
stored settings equal to the factory settings.
Information Submenu
Menu Structure
Parameter Type
Info
+POW
Positive Watts Consumed
-POW
Negative Watts Consumed
SWR#
Software Release Number
SWB#
Software Build Number
Positive Watts Consumed
A read only indication of power consumed by the card from the frames +12V rail.
Negative Watts Consumed
A read only indication of power consumed by the card from the frames +-7.5V rail.
Software Release Number
A read only indication of the software release number. A higher number is newer release of software.
Software Build Number
A read only indication of the software build number. Software build number is an internal indicator
used by Sierra engineers to differentiate different software builds.