Sierra Video DFR-8300 - Manual (Page 22)

2-10
• Installation
DFR-8300 Series User Manual (Rev. 2.0)
Fault Reporting
If the optional CFM-8310 module is installed, the error conditions listed in Table 2.2 will trigger the
SMPTE 269M fault reporting circuit, and the signal will be sent to the SMPTE Alarm BNC on the
back of the frame. The SMPTE 269M fault reporting option is only available for the DFR-8310 frames.
Table 2.2 Status LED Descriptions
Location LED Color Description
Frame Door FAULT Red
When lit, this LED indicates that an alarm condition is
occurring on a card. This comes standard for the DFR-8321
series frames, and with the CFM-8310 option in the DFR-8310
series frames.
Frame Door FAN FAIL Red
When lit, this LED indicates that a fan on the frame or on the
PS-8300 is stalled. This comes standard for the DFR-8321
series frames, and with the CFM-8310 option in the DFR-8310
series frames.
Power Supply STAT
Green
When lit green, this LED indicates that the PS-8300 is
operating normally.
Red
When flashing red, this LED indicates:
• there is an output over, or under, voltage conditions on the
PS-8300.
• there is no power; assuming that the second supply is
operating normally.
For More Information…
• on the SMPTE 269M fault reporting option in a DFR-8310 series frame, refer to the
section “SMPTE Fault Reporting Option”.