Basics, 1 basics – Sensoray 618 User Manual
Page 3

Sensoray Model 618/619 Smart A/D
1
Basics
1 Basics
1.1 Limited Warranty
Sensoray Company, Incorporated (Sensoray) warrants
the Model 618/619 hardware to be free from defects in
material and workmanship and perform to applicable
published Sensoray specifications for two years from the
date of shipment to purchaser. Sensoray will, at its
option, repair or replace equipment that proves to be
defective during the warranty period. This warranty
includes parts and labor.
The warranty provided herein does not cover equipment
subjected to abuse, misuse, accident, alteration, neglect,
or unauthorized repair or installation. Sensoray shall have
the right of final determination as to the existence and
cause of defect.
As for items repaired or replaced under warranty, the
warranty shall continue in effect for the remainder of the
original warranty period, or for ninety days following
date of shipment by Sensoray of the repaired or replaced
part, whichever period is longer.
A Return Material Authorization (RMA) number must be
obtained from the factory and clearly marked on the
outside of the package before any equipment will be
accepted for warranty work. Sensoray will pay the
shipping costs of returning to the owner parts that are
covered by warranty.
Sensoray believes that the information in this manual is
accurate. The document has been carefully reviewed for
technical accuracy. In the event that technical or
typographical errors exist, Sensoray reserves the right to
make changes to subsequent editions of this document
without prior notice to holders of this edition. The reader
should consult Sensoray if errors are suspected. In no
event shall Sensoray be liable for any damages arising
out of or related to this document or the information
contained in it.
EXCEPT AS SPECIFIED HEREIN, SENSORAY
MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
AND SPECIFICALLY DISCLAIMS ANY
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. CUSTOMER'S
RIGHT TO RECOVER DAMAGES CAUSED BY
FAULT OR NEGLIGENCE ON THE PART OF
SENSORAY SHALL BE LIMITED TO THE AMOUNT
THERETOFORE PAID BY THE CUSTOMER.
SENSORAY WILL NOT BE LIABLE FOR DAMAGES
RESULTING FROM LOSS OF DATA, PROFITS, USE
OF PRODUCTS, OR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, EVEN IF ADVISED
OF THE POSSIBILITY THEROF.
1.2 Special Handling Instructions
The model 618 and 619 Smart A/D circuit boards contain
CMOS circuitry that is sensitive to Electrostatic
Discharge (ESD).
Special care should be taken in handling, transporting,
and installing the Smart A/D board to prevent ESD
damage. In particular:
• Do not remove the circuit board from its protective
anti-static bag until you are ready to configure the
board for installation.
• Handle the circuit board only at grounded, ESD
protected stations.
• Remove power from the target system before installing
or removing the circuit board.