Seaward Supernova XE - Manual (Page 47)

How to download Data
37
Output Connection
Selects the tester output connection to which the results are to be
sent, available options are:
RS232
This sends the data to the RS232 serial port (9 way D connection on
the tester) for connection using a compatible serial cable.
Parallel
This sends the data to the Parallel port.
Baud Rate
If available this option selects to the Baud Rate at which the data is
sent, possible values are 9600, 19200 or 28800.
Download Format
This field shows the format choices available depending upon the
destination selected.
For downloading to a PC the user has the option of sending data in a
PATS+ format, compatible with Seaward PATS+ software, SSS
format - Seaward super system, compatible with Seawards PATS
Win software, certificate - downloads results in non-ASCII certificate
format.
In PATS+ format the user has the option to download by site (send
site) or to download by user (send user). This will be truncated to 10
characters.
For downloading to a generic A4 printer the user has the option of
sending data as a certificate, or a list, or as pass/fail labels. In the
certificate format the user has the option to produce one certificate
per page or to produce continuous printouts.
For downloading to a roll printer, including ‘till roll’ and thermal
printers the user has the option of sending data as a continuous list
or as pass/fail labels. When using a compatible thermal roll printer
the pass/fail labels will produce appliance number and in a number
and barcode format. However, the restrictions of paper width means
that appliance numbers representing more than 12 digits cannot be