Seaward B255 - Manual (Page 11)

Operating Manual Clare B255 Power Tool & Appliance Test Station
7
Please take adequate care with packing and arrange insurance cover against
transit damage or loss when returning the instrument – if possible use the
original packing box and supports.
Regularly calibrate all test equipment to meet internal quality or regulatory
licensing authority requirements and to keep the equipment in a safe working
condition. Return the equipment to Seaward Electronic Ltd for this purpose.
Keep the equipment in a clean condition. Examine all input and test output
leads and connectors regularly to guarantee they are in a safe working
condition.
The equipment contains parts that are specific to the equipment only,
therefore, order spare parts from the address on the previous page. Seaward
Electronic Ltd strictly forbid any use of spare parts, other than those acquired
from the original manufacturer.
Summary of Safety Information
Should there be any doubt about location, setting up procedure or operation
of the test equipment, contact Seaward Electronic Ltd. Report any apparent
malfunctions immediately.
Maintain the test equipment in accordance with Health and Safety at Work Act
and the Electricity at Work Regulations. The supply socket used for
connection to the incoming mains system should undergo earth loop
impedance measurements in keeping with the regulations to guarantee safe
operation.
NOTE
Your Health and Safety Inspector may, with the benefit of on-site
observations, offer alternate or additional instructions to the above
recommendations.