Scotsman SCE170 - Manual (Page 32)

Bulletin Number: PS - 7 - 98
Bulletin Date: July 1998
Subject: SCE170 Control Module
The control module in the SCE170 has been rotated to improve wiring layout. Production of
machines with the module rotated began with July 1998 production. The first serial number is:
120714-12B. Addionally, the curtain’s bottom edge has been cut back beginning with sn: 120790-12B.
Prior Layout
Wires are bundled together
Wire Bundle
High Voltage
New Layout
Module is rotated and wires are
separated into high and low
voltage bundles.
This can be done in the field by
cutting the cable ties, removing
the four module mounting
screws and rotating the module
90 o counter-clockwise. Then
remounted with the original
screws. The wires should then
be bundled as shown.
Low Voltage
SERVICE BULLETIN