Sce170, Removal and replacement: purge valve – Scotsman SCE170 User Manual
Page 27
16. Unscrew the two screws holding the purge
valve to the ice machine.
17. Pull the purge valve forward until the discharge
hose clamp is accessible.
18. Loosen hose clamp and pull purge valve from
ice machine.
Service:
19. Remove coil:
Flip plastic retainer up and slide off valve.
Pull coil up and off valve.
20. Open valve:
Rotate stem CCW as far as it goes.
Lift stem up and off valve.
Pull up on plunger - do not loose spring.
21. Examine seat & plunger for dirt/damage. Clean
and reassemble. If damaged, replace valve.
22. Reverse above steps with original parts or new
valve to reassemble.
Hose Clamp
Plastic Retainer
Coil
Stem
Plunger
Seat
Spring
Valve Body
Service of Purge Valve
Mounting Screws
Removal and Replacement: Purge Valve
SCE170
October 1998
Page 27
See also other documents in the category Scotsman Equipment:
- Prodigy Plus D Series (23 pages)
- C1030 (23 pages)
- Prodigy Plus D Series Remote Condenser Modular Cuber (26 pages)
- N1322 (54 pages)
- DC33 (26 pages)
- C1848 (22 pages)
- C2148W (25 pages)
- C2148R (26 pages)
- CU3030 (104 pages)
- EH430 D (31 pages)
- N1322 (24 pages)
- N1322 (18 pages)
- N1322L (18 pages)
- AFE424 (15 pages)
- AFE400 (25 pages)
- C2648R (25 pages)
- CU0920 (17 pages)
- CU0920 (31 pages)
- CB1030 (43 pages)
- CU3030 (18 pages)
- CU50 (16 pages)
- FME804 Installation (16 pages)
- FME804 Installation (32 pages)
- NB1322 (37 pages)
- HD30 (18 pages)
- HID540 Service Manual (41 pages)
- HID540AW (20 pages)
- MDT4F12 (16 pages)
- SCCP30 (15 pages)
- SCCP30 (30 pages)
- SCN60 (18 pages)
- SCN60 (38 pages)
- MDT5N40 (16 pages)
- TDE650 (33 pages)
- SCR33 (20 pages)
- ECC1800 (4 pages)
- SCCP50 (33 pages)
- SCV32 (16 pages)
- 2000 Prodigy Eclipse (50 pages)
- EH222 with ECC (57 pages)
- Nugget Ice Machines (22 pages)
- CME650 (24 pages)
- CD200 (19 pages)
- CME1656 (43 pages)
- CME456 (42 pages)