beautypg.com

Specifications – Scotsman HID312AW User Manual

Page 3

background image

HID312AW, HID525AW and HID540AW

Installation and User’s Manual

March 2015

Page 3

Specifications

The ice maker-dispenser is designed to be installed

indoors, in a controlled environment. Although

it can operate in a wide range of air and water

temperatures, it will provide the best performance if

not subject to extremes.
Air Temperature Limitations

• Maximum: 100

o

F. or 38

o

C.

• Minimum: 50

o

F. or 10

o

C.

Water Temperature Limitations

• Maximum: 100

o

F. or 38

o

C.

• Minimum: 40

o

F. or 4.4

o

C.

Water Pressure, potable

• Maximum: 80 PSI or 5.5 Bar
• Minimum: 20 PSI or 1.3 Bar

Water Conductivity:

• Minimum: 10 microSiemens/cm

RO water may be supplied to the potable water

system, but if it has less than the above conductivity,

the water level sensor will not detect water and the

unit will not make ice.
Deionized water will not work and isn’t recommended.
Voltage

• Maximum: 126 Minimum: 104

Operating the machine outside of any of the above

limitations is considered abuse and any resulting

damage is not covered by warranty and could cause a

complete loss of warranty coverage.
Warranty Information
The warranty statement for this product is provided

separately from this manual. Refer to it for applicable

coverage. In general warranty covers defects

in material or workmanship. It does not cover

maintenance, corrections to installations, or situations

when the machine is operated in circumstances that

exceed the limitations printed above.

Product Information
The product is an ice maker-dispenser. It is designed

to be hung on a wall over a sink.

• All models require a drain. An internal drain basin

separates the ice storage bin’s drain from other

drains.

• A backflow preventer may be required by local

plumbing codes.

• A power cord with NEMA 5-15P plug is included.
• Air cooled models flow air left to right and include

a cleanable air filter.

• Ice or water vending is triggered by touch free

sensors, no other activation method is available.

• For available options and kits, see sales literature.

Scotsman Ice Systems are designed and

manufactured with the highest regard for safety and

performance. They meet or exceed the standards of

UL and NSF.
Scotsman assumes no liability or responsibility of

any kind for products manufactured by Scotsman

that have been altered in any way, including the use

of any part and/or other components not specifically

approved by Scotsman.
Scotsman reserves the right to make design changes

and/or improvements at any time. Specifications and

design are subject to change without notice.

Model

Electrical

Condenser

Typical Amp Draw

Maximum Fuse Size

HID312AW-1A 115/60/1

Air

5.7 - 6

15

HID525AW-1A 115/60/1

Air

7.2 - 8

15

HID540AW-1A 115/60/1

Air

7.2 - 8

15

This manual is related to the following products: