Scotsman C1448 - Manual (Page 9)

C1448, C1848, C2148W
Air and Water Cooled User Manual
November 2006
Page 8
Panel Removal
1. Locate and loosen the two screws at the front
edge of the top panel.
2. Pull the front panel out at the top until it clears the
top panel.
3. Lift the front panel up and off the machine.
4. Remove two screws at front edge of top panel.
5. Lift up the front of the top panel, push it back an
inch, then lift to remove.
6. Locate and loosen the screw holding each side
panel to the base.
7. Pull the side panel forward to release it from the
back panel.
Switch Bezel
All models ship with the On and Off switches front
accessible. if desired, the On and Off switches can be
covered up to prevent unauthorized use by changing
the bezel in the front panel's trim strip. A cover-up
bezel ships loose with the machine.
To change bezels: Remove the front panel and refer
to the instruction label on the inside of the front panel.
Push snaps of the standard bezel in and pull the bezel
out of the front panel. Locate other bezel. Push into
trim strip from the front until it snaps into place. Return
the front panel to its original position and secure it to
the cabinet.
Panel Removal
1
6
5
5