Scotsman C1448 - Manual (Page 4)

C1448, C1848, C2148W
Air and Water Cooled User Manual
November 2006
Page 3
Product Information
The product is a modular cuber. That type of machine
is designed to be placed on an ice storage bin or
an ice dispenser. Many installations only require the
matching bin, but some also require an adapter to be
placed between the bin and the cuber or between the
dispenser and the cuber.
This product cannot be stacked. See the chart for
application information.
Model Number Description
Example:
• C1448SA-32B
• C= cuber
• 14= nominal ice capacity in 100s of pounds
• 48= nominal width of cabinet
• S= Cube size. S=small or half dice cube.
• M=medium or full dice cube
• A=Condenser type. A=air cooled. W=water cooled
• -32=Electrical code. -32=208-230 single phase.
-3=208-230 three phase
• B=Series revision code. B=2nd series
Note: In some areas of this manual model numbers
may include only the first five characters of the model
number, meaning that the cube size, condenser
type and voltage differences are not critical to the
information listed there.
Options:
There are several field-installed options that can be
installed at initial start up or later. They include: • KVS
- Vari-Smart adjustable ice level system.
• KSBU - Smart-Board advanced feature control.
• A39515-021 air baffle to reduce air recirculation
around the back of the cabinet when installed in a
corner.
Some installations require bin adapters. See the table
below.
Standard Bin Applications - Adapter information.
Model BH900*, B948S BH1100,
BH1300,
BH1600
C1448, C1848,
C2148
Direct Fit, no
adapter needed
No adapter
needed
* Note. If previously equipped with stainless steel
baffle, KBAFFLE3, remove and replace with original
plastic baffle.
Other Bins & Applications:
Note the drop zone and ultrasonic sensor locations in
the illustrations.
Scotsman ice systems are designed and
manufactured with the highest regard for safety and
performance. They meet or exceed the standards of
UL and NSF.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specifically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specifications and
design are subject to change without notice.
December 2011