Rtc-965 specifications, Rtc-965, Audio – ROTEL RTC965 User Manual
Page 23: Video, Fm tuner, Am tuner, General
RTC-965
23
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
RTC-965 Specifications
Audio
Total Harmonic Distortion:
<0.03%
Intermodulation Distortion (60 Hz: 7 kHz):
<0.03%
Frequency Response (line level):
10 Hz - 70 kHz,
±
3 dB
Signal to Noise Ratio (IHF “A” weighted): 92 dB (Stereo)
70 dB (Dolby Digital)
Input Sensitivity/Impedance
Line Level:
200 mV/47 kohms
Phono Input:
3.5 mV/47 kohms
Tone Controls (Bass/Treble):
±
8 dB at 100 Hz/10 kHz
Video
Frequency Response:
3 Hz-10 MHz,
±
3 dB
Signal to Noise Ratio:
45 dB
Input Impedance:
75 ohms
Output Impedance:
75 ohms
Output Level:
1 volt
FM Tuner
Usable Sensitivity:
14.2 dBf
Signal to Noise Ratio:
70 dBf
Harmonic Distortion:
0.3%
Stereo Separation (1 kHz):
45 dB
Output Level (mono):
550 mV,
±
100 mV
Antenna Input:
75 ohms unbalanced
AM Tuner
Sensitivity:
500
µ
V/m
Signal to Noise Ratio:
40 dBf
Output Level:
150 mV,
±
30 mV
Antenna Input:
Loop Antenna
General
Power Consumption:
40 watts
Power Requirements (AC):
115 volts 50/60 Hz or
230 volts 50/60 Hz
Weight:
6.9 Kg/15.2 lb.
Dimensions (W x H x D):
450 x 158 x 303 mm
17
3/4
" x 6
1/4
" x 12"
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
DTS is a registered trademark of Digital Theater Systems.
Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Confidential unpub-
lished works © 1992 – 1997 Dolby Laboratories, Inc. All rights reserved.
DYNAMIC RANGE: whether the dynamic range compression is
turned OFF (full dynamic range/no compression), MID (moderate
dynamic range/moderate compression), or MIN (minimum dy-
namic range/maximum compression)
MENU DISPLAY: determines whether status information will ap-
pear on screen when volume, input, or other selections are made
– choices are SCREEN (display on) or OFF (display off).
SCREEN COLOR: selects a background color for the on screen dis-
play.
Change any setting by moving the cursor to the desired line using
the UP/DOWN buttons on the remote or the NUMERIC Keypad
front panel buttons (
), change the setting by pressing the EN-
TER button to step through the choices. Return to the MAIN menu
by pressing the BACK button. Cancel the On-Screen Display by
pressing MENU.