RGBLink RMS 8424S User Manual - Manual (Page 35)

4. Menu Operation
Display Submenu
RMS 8424S User Manual 35
Display Submenu
Enter to ―DISPLAY‖ submenu, to set the following items:
1. INFO: Select ―ON‖, screen will display input signal‖, ―RATIO‖, ―SCAN‖,
―MARKER‖, ―FLIP‖, ‖ZOOM‖ and marker set information at the up-left.
Push the ―F1‖ button to adjust the width of the marker, and push the
―F2‖ button to adjust the height of the marker.
2. MARKER: Safe area. Select ―ON‖, screen will display the safe area,
and select ―OFF‖ to close it.
3. TITLE: User edited title.
4. MODE: ‖DISPLAY‖ or ―TP‖. Select and push ―DISPLAY‖ option, screen
will display the image. Select ―TP‖ and push ‖DISPLAY‖, screen will
display test patterns to check if LCD screen operate normally.
5. MARKER 4:3:
Choose ―ON‖, then 4:3 scale mark on image.
6. AUTO TP: Choose ―ON‖, and open the auto test pattern function.
7. AUTO TIME: The auto switch time adjustment range is 5 to 30S.