Dicota Harbour 2.0 - Manual (Page 31)

31
3. If you have setup HyperTerminal before, please go to Start,
Programs, Accessories, Communications, HyperTerminal. Click
File and choose Properties. The Properties dialog page will appear
on your screen. If it is your first time to setup HyperTerminal, you will
see the following page during the setup procedure. (Ref. Fig.11)
Fig.11
4. Click the Connect using item to indicate the proper COM port, which
appeared in step 1. Follow the instructions to complete the setup.
Harbour 2.0 User’s Manual
31