Dicota Harbour 2.0 User Manual

Page 29

2.3.2 For Windows 2000/XP:

1. Connect the Harbour 2.0 to your printer with the parallel cable and

then turn on the printer.

2. Connect the Harbour 2.0 to the USB port on your computer with the

USB2.0 transfer cable provided.

3. If you have installed a printer device before, go to Start, Settings, and

Printers. Right-click the default-installed printer and choose

Properties. The Properties dialog box of the installed printer will

appear on your screen.

4. Click Ports folder tab and change the printer port to USB001:

(Virtual printer port for USB). (Ref. Fig.8)

Fig.8

5. If you do not have a printer installed yet, click on Start, Settings,

Printers and choose Add Printer. The Add Printer Wizard will start

and assist you to install a new printer device. Select the printer

manufacturer and model name from the list provided by the wizard or

use the printer driver diskette came with your printer.

Harbour 2.0 User’s Manual