RGBLink DXP D0108 User Manual - Manual (Page 6)

DXP D0108 User Manual 6
Safe Operation Summary
The general safety information in this summary is for operating
personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of
the top panel will expose dangerous voltages. To avoid personal
injury, do not remove the top panel. Do not operate the unit
without the panel installed.
Use the Proper Properly
This product is intended to operate from a power source that will
not apply more than 230 volts rms between the supply
conductors or between both supply conductor and ground. A
protective ground connection by way of grounding conductor in
the power cord is essential for safe operation.
Ground the Product Properly
This product is grounded through the grounding conductor of the
power cord. To avoid electrical shock, plug the power cord into a
properly wired receptacle before connecting to the product input
or output terminals. A protective-ground connection by way of
the grounding conductor in the power cord is essential for safe
operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your product.
Use only a power cord that is in good condition. Refer cord and
connector changes to qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type,
voltage rating, and current rating characteristics. Refer fuse
replacement to qualified service personnel.