RGBLink DXP D0108 User Manual - Manual (Page 29)

DXP D0108 User Manual 29
Power indicator light is off or blinks
1. Check whether plug in the power cord, and press the switch to
"ON" position;
2. Check whether the power cable is connected, and in good
connection;
3. If above without problem, then the power indicator is damaged.
Signal indicator light is off or blinks
1. Check whether connect the signal;
2. Check whether the input signal, input wire and output wire are
Normal, the interfaces are in good connection;
3. If above without problem, then the signal indicator is damaged.
Output images shake or cannot full
screen display
Each corresponding read EDID file from output displays is
different, and cause the synthetic EDID file cannot be consistent
with the EDID files from display. Users can use the same type of
displays from the same manufacturer, or displays with the same
EDID files.