How to crop the image, How to set the position of the image, How to set up the pip – RGBLink CP 3072 Quick Start User Manual
Page 14

Address:S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
13
1. Push the [CROP] button in Function Edit Area and enter to the crop function menus.
2. Turn the knob, choose H SIZE, V SIZE, H POS or V POS, and set according to actual need, user
can adjust the items by the knob or number buttons, after setting, push the knob to confirm.
3. If image quality distorts by improper operation, it can be recover by reset.
How to Set the Position of the Image
1. Push the [POS] button in Function Edit Area and enter to the position adjustment function menus.
2. Turn the knob, choose H POS or V POS, and set according to actual need. User can adjust the
items by the knob or number buttons, after setting, push the knob to confirm.
3. If image quality distorts by improper operation, it can be recover by reset.
Push the [PIP] button in PIP Operation Area, and enter to the PIP function menus. Turn the knob
and choose
PIP function.
LAYOUT: There are 7 kinds of PIP layouts, PIP L+T, PIP R+T, PIP L+B, PIP R+B, PIP CENT,
PBP L+R and PBP T+B. Take 3 results for example, shown as follows:
PIP L+T PBP L+R PBP T+B